表面活性劑單體
聯系我們
Contact Us
廣州方中化工有限公司
廣東方中高新材料有限公司
電話：020-82327221
傳真：020-82327331
24小時技術服務專線:18820031519
地址：廣州科學城神舟路768號7棟
廠址：廣東英德英紅園新材料基地
表面活性劑單體
您現在所在的位置：首頁 » 公司產品 » 表面活性劑單體
琥珀酸二異辛酯磺酸鈉 FTRT? T50
發布時間：2019/5/15 12:13:57 點擊量：
|
產品特點 |
1、50%有水快T是陰離子表面活性劑。
2、具有滲透快速、均勻、潤濕性、乳化性、起泡性均佳等特點。不耐強酸、強堿、重金屬鹽及還原劑等。
3、可溶于水、低級醇等親水性溶劑；亦可溶于苯、四氯化碳、煤油、石油系列溶劑等。水溶液呈乳白色，1%水溶液的pH值為4.0～7.0。
4、本品滲透快速均勻。溫度在40℃以下，pH值在5-10之間使用效果最好。絲織物等一經滲透劑處理完后，可不因溫度、酸堿等變化而影響其滲透性能。主要用于織物滲透、印染、農藥乳化、制革、選礦等。
|
物理數據 |
|
外 觀 |
無色至淡黃色均相液體 |
|
PH值 |
4-7 |
|
水分 |
29－32% |
|
快T |
48－52% |
|
乙醇 |
18-20% |
|
固含 |
≥50% |
注：以上數據僅供參考。
包裝與儲存
|
用法與用量 |
1.
作為乳液聚合后添加劑建用量議0.1-0.3%（基于總量），作為潤濕分散劑建議用量0.5-5%。2. 為獲得最佳性能，應在分散前添加，使用量在很大程度上取決于應用體系，建議用戶在使用前通過實驗確定最佳添加量。
3. 因為溶劑的揮發會導致凝膠，如果發生凝膠需加入少量的乙醇（1-2%），滾動桶直至凝膠全部消失。如果出現凍融現象，建議在使用以前進行充分攪拌。
|
包裝與儲存 |
200kg/桶 。貯存在常溫下，避免陽光直射，不用時將容器密封。
保質期：常溫下可貯存12個月以上。
|
Features |
1.FTRT® T50 belongs to anionic surfactant.
2.It has the characteristics of fast penetration, uniformity, wettability, emulsifying property and excellent foaming property. However, it is not resistant to strong acids, strong alkalis, heavy metal salts and reducing agents.
3.The pH of the 1% aqueous solution of this product is 4.0-7.0, which is milky white. It is soluble in not only hydrophilic solvents such as water and lower alcohols, but also soluble in benzene, carbon tetrachloride, kerosene, and petroleum solvents.
4.This product is mainly used for fabric penetration, printing and dyeing, pesticide emulsification, leather making, mineral processing, etc. The temperature is controlled below 40 °C, and the pH value is best between 5-10. After the silk fabric and the like are treated by the penetrating agent, the permeability of the silk fabric is not affected by changes in temperature, acid and alkali.
|
Physical data |
|
Appearance |
Colorless to pale yellow homogeneous liquid |
|
PH |
4-7 |
|
Moisture |
20－25% |
|
Active content |
58-60% |
|
Ethanol: |
12-16% |
|
Solid content |
≥60% |
Note: The above data is for reference only.
|
Usage and dosage |
1.If used as an additive after emulsion polymerization, the recommended dosage is 0.1-0.3% (based on the total amount); if used as a wetting and dispersing agent, the recommended dosage is 0.5-5%.
2.For best performance, it should be added before dispersion. The amount of use depends largely on the application system. It is recommended that the user determine the optimum amount by experiment before use.
3.Because the solvent volatilizes, it will cause gelation. If gelation occurs, a small amount of ethanol (1-2%) should be added and rolled until the gel disappears completely. If freezing and thawing occurs, it is recommended to stir well before use.
|
Packaging and storage |
200kg / drum. Store at room temperature, avoid direct sunlight, and seal the container when not in use.
Shelf life: It can be stored for more than 12 months at room temperature.
